Nano “RPM” super coating to lubricate your chain

CAUTION: Do not just apply this coating to your chain! First clean the chain thoroughly with chemical solvent in an ultrasonic bath. If you can’t do this, let us do it! Our facility is perfect for this.
What you can do: Buy a chain from us and choose the “Nano treatment” option.
If you have the base of the chain well laid, then you can “touch-up” with this bottle.
If you still want to coat the chain yourself, you can, see below how to do it: DESCRIPTION/USE
The ultimate lubrication for your chain in dry and wet weather conditions! This revolutionary lubricant is suitable for all chains.
100ml bottle. Good for 20 coating turns and 20,000km of low-friction chains! – Durable nano coating. – Wattage gain due to less friction. – Better shifting performance. – Extension of chain, chainrings and sprockets/cassettes lifespan. – Water- and dirt-resistant. The special nano-coating technology makes it possible to lubricate your chain only once every 500km in ALL WEATHER CIRCUMSTANCES. However, for the intended result, it is necessary to follow the following. Wear protective gloves/eye protection/face shield.
1: Degrease the chain thoroughly and completely with chemical degreaser;
2: Dry the chain thoroughly.
3: When the chain is dry apply one drop of RPM chain coat per link. (Important to apply link by link)
4: Allow your chain to dry for at least 12 hours. After 12 hours dry the outside of the chain with a cloth.
5: Ready to use! At least 500km of carefree riding without further lubrication. Only rinse the chain with water and dry it.
6: Repeat steps 1 to 5 every 500km.